Old-F20 heli coil

Oldiron29 · Nov 23, 2011

Old-F-20, In that stud work, was there a brand or kind of heli coil you perfer? I have done a little poking around and see there is a locking type for studs so they will not move after install. The 10-20 will not be in the shop till around first of the year, so I have some time to locate supply"s. I will look for as much online help as I can get because I don"t wont to do it again. I would like to do this in frame, so taken it to machine shop is not in my plans. oldiron29

Ron in Nebr · Nov 23, 2011

Actually I think "helicoil" might be a brand name, and, if so, probably the best option...should be available at most any parts store.

El Toro · Nov 23, 2011

The locking type are Keenserts. If where the studs are installed isn't worn too much helicoils should fix the problem. Talk to your local auto machine shop. You may be able to get of them to install them on the tractor. Hal

Old-F20 · Nov 23, 2011

when i get home later ill take a pic of the setup i have for ya. I got mine through my Fastenal guy

El Toro · Nov 23, 2011

Here's a link to keenserts. Hal
Untitled URL Link

Oldiron29 · Nov 23, 2011

Old-F20, I have a fastenal store not to far away.
That would be great if I could get everything there. oldiron29

Old-F20 · Nov 24, 2011

oldiron, heres what i get from my fastenal guy. had to go out to the shop and look at it to remember the brand. heres a linky

http://www.newmantools.com/recoil1.htm

Old-F20 heli coil

Oldiron29

Well-known Member

Ron in Nebr

Member

El Toro

Well-known Member

Old-F20

Member

El Toro

Well-known Member

Oldiron29

Well-known Member

Old-F20

Member

Similar threads