farmall h rear wheel clamps

Anonymous-0 · Nov 21, 2011

I bought a set a of rear steel 8x51 and need a set a of clamps for these.Does anyone know where I could buy these.

dej(Jed) · Nov 22, 2011

That is kind of confusing. Most steel wheels simply slide over the axels and clamp on. The clamp is a part of the wheel?

rustyfarmall · Nov 22, 2011

(quoted from post at 20:03:57 11/21/11) I bought a set a of rear steel 8x51 and need a set a of clamps for these.Does anyone know where I could buy these.

There are 2 different styles of steel wheels used on an H. One style is similar to the F 12 and F 14 and just clamps on, the other style has a hub very similar to the cast iron center used with the rubber tired wheels. I don't know if the clamps for the rubber tired cast centers will interchange with what you have, but it might be worth looking into.

randy hall · Nov 22, 2011

(quoted from post at 04:03:57 11/22/11) I bought a set a of rear steel 8x51 and need a set a of clamps for these.Does anyone know where I could buy these.

at first i thought you had bought a set of m wheels because standardard steel wheel size for an m is eight inches and an h is six inches but i looked in my owners manual for special attachments for a farmall h tractor and it lists a eight inch wide faces steel rear wheel for h's. so this might be what you have.

rustyfarmall · Nov 22, 2011

(quoted from post at 12:25:05 11/22/11)

(quoted from post at 04:03:57 11/22/11) I bought a set a of rear steel 8x51 and need a set a of clamps for these.Does anyone know where I could buy these.

Click to expand...

at first i thought you had bought a set of m wheels because standardard steel wheel size for an m is eight inches and an h is six inches but i looked in my owners manual for special attachments for a farmall h tractor and it lists a eight inch wide faces steel rear wheel for h's. so this might be what you have.

And if you look in a parts catalog, you will find enough steel wheeled options to make your head swim.

D Slater · Nov 22, 2011

Sorry don't know where to find but can give you a part number if you don't already have it.
Clamp 9554DB, clamp uses 7/8 diameter bolts.

Anonymous-0 · Dec 12, 2011

I found the clamps I needed in my clutterd garage.They didn't fit the pneumatic hubs I had for the H so I just assumed they were for an M.

farmall h rear wheel clamps

Anonymous-0

Well-known Member

dej(Jed)

Well-known Member

rustyfarmall

Well-known Member

randy hall

Member

rustyfarmall

Well-known Member

D Slater

Well-known Member

Anonymous-0

Well-known Member

Similar threads