Anonymous-0
Well-known Member
Anyone ever see a three point to fast hitch adapter. I would like to be able to use some of my fast hitch implement on my newer tractor
- Thread starter Anonymous-0
- Start date
I doubt it. Haven't seen any kits.
I have put six Fast Hitches, both front and rear, on a few IH tractors that were not engineered for the Fast Hitch. Every installation was different. Just bought another 450 type bail (wishbone) on eBay that will go on the front of my 660.
Just buy the bail and sockets from salvage tractors and start fabricating lift and pull points. Picture below is the lift hardware for a Standard Tread 400. Won't help you much as you already have a 3ph lift system.
<a href="http://s140.photobucket.com/albums/r16/Wardner/?action=view¤t=W-400113.jpg" target="_blank">
![W-400113.jpg" border="0" alt="Photobucket](https://i140.photobucket.com/albums/r16/Wardner/W-400113.jpg" border="0" alt="Photobucket)
</a>
I have put six Fast Hitches, both front and rear, on a few IH tractors that were not engineered for the Fast Hitch. Every installation was different. Just bought another 450 type bail (wishbone) on eBay that will go on the front of my 660.
Just buy the bail and sockets from salvage tractors and start fabricating lift and pull points. Picture below is the lift hardware for a Standard Tread 400. Won't help you much as you already have a 3ph lift system.
<a href="http://s140.photobucket.com/albums/r16/Wardner/?action=view¤t=W-400113.jpg" target="_blank">
soybeanjoe
Member
There use to be a company that built a 3 pt (tractor) to fasthitch (imp.) adaptor. Had a relative that had one back in the "80s & have seen a couple at sales. No idea where you can get one or what they"re worth
Couple implement dealers in Iowa had the 3pt to fast hitch 2 point adapters for use with their implements- Landpride chopper was the one on disply with adapter mounted. The local IHC/Case/NH whatever it is now dealer had the same type adapter- a inverted U with adjustable top link at curve of U, lower mounts at tips and opposite side of tips had the 2 point prongs for insert into fast hitch. Another type I"m told is a triangle frame instead of inverted U and this design is supposed to be available as a set of plans for home building-- with builder taking his chances on liability if resold. RN
armand tatro
Well-known Member
Paul Abbot co. in Ak. made these adapters as well as other hitchs and adapters. Armand
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy