Farmall 560 Tractor

JAngel · Nov 7, 2011

Can someone tell me if there is any other location on a Farmall 560 tractor that I can look for the serial number beside the tag on the bell housing. Someone painted over it and its not readable.

rustyfarmall · Nov 7, 2011

(quoted from post at 11:53:12 11/07/11) Can someone tell me if there is any other location on a Farmall 560 tractor that I can look for the serial number beside the tag on the bell housing. Someone painted over it and its not readable.

The actual serial number should be stamped into the tag, so a can of carb/brake cleaner and some #00 steel wool should remove the paint. Spray the carb cleaner on the steel wool to prevent the carb cleaner from going where you don't want it to go.

mkirsch · Nov 7, 2011

There is no other location for the serial number. It is only on the serial tag.

I have found that Gumout gasket remover spray is very good at peeling paint. Spray the gasket remover on and peel the paint off in one sheet.

The serial number is stamped into the tag so paint remover will not remove it.

JAngel · Nov 7, 2011

The only number that I have found stamped on the tag is 33925 S-Y-CC. Does this number mean anything.

rustyfarmall · Nov 7, 2011

(quoted from post at 13:13:35 11/07/11) The only number that I have found stamped on the tag is 33925 S-Y-CC. Does this number mean anything.

I believe that IS the serial number, and would indicate a mid to late 1960 tractor.

JAngel · Nov 7, 2011

Who could I call to find out for sure? I'm trying to find out more info on this tractor.

tn terry t · Nov 7, 2011

(quoted from post at 16:24:37 11/07/11) Who could I call to find out for sure? I'm trying to find out more info on this tractor.

thats the number not too far from mine

460anger · Nov 7, 2011

According to your numbers it's a 1960.
S- means TA with provisions for 540 independent PTO
Y- hydra touch low and reverse attachment(with 12 gpm pump)
CC- third speed heavy duty tillage gear
That's according to the International Harvester Data book. Hope this helps.

Wardner · Nov 7, 2011

S = TA with 540 IPTO
Y = 12 GPM Hydra-Touch pump
CC= 3rd speed heavy tillage gear attachment

These codes are in the parts book (page 7).

The preceding numbers (33925) are the serial number.

Wardner · Nov 7, 2011

S = TA with 540 IPTO
Y = 12 GPM Hydra-Touch pump
CC= 3rd speed heavy tillage gear attachment

The preceding numbers (33925) are the serial number.

JAngel · Nov 13, 2011

Ok, thanks. Another question I have is... Does it have a hydralic filter and where would it be if it does? I'm needing to change out the hydralic fluid, I'm having trouble with the front end loader going up and down.

Farmall 560 Tractor

JAngel

New User

rustyfarmall

Well-known Member

mkirsch

Well-known Member

JAngel

New User

rustyfarmall

Well-known Member

JAngel

New User

tn terry t

Well-known Member

460anger

Member

Wardner

Well-known Member

Wardner

Well-known Member

JAngel

New User

Similar threads