BN fornt bolster oil or grease

gregnnerk · Nov 2, 2011

Can any one advise me what type, and or weight of oil or grease needs to be put into the front bolster where the steering gears are?

gene bender · Nov 2, 2011

I have rebuilt several and unless you have replaced the out-put seal yours will probably not hold 90wt as thats what was there originaly. Some use cornhead grease. But for the top bearing and the worm on the gear to work well 90wt is the best. Not that hard to rebuild just remove the assy by removing the 4 bolts at the bottom of the sector and the whole assy will drop down.Remove the pedestal first.

gregnnerk · Nov 3, 2011

We have rebuilt the unit, put new seels, and gaskets, in. The only part we did not do is where the steering rod goes down throw

BN fornt bolster oil or grease

gregnnerk

New User

gene bender

Well-known Member

gregnnerk

New User

Similar threads