H Transmission Oil Seal

George Rausch · Nov 1, 2011

You guys are probably getting tired of hearing from me, but I'm having fits again. Got the four tapered bolts out, got the 4-hole yoke out, finally got the center bolt out this morning, now the 2-hole yoke (or whatever it is called) absolutely positively will not budge. Have tried lots of heat on and off all day, have built a puller, bolted up against the 2-hole-yoke-thing, and have been using the reinstalled center bolt as a pusher to push the yoke out; nothing.
Anyway, am I missing something? This 2-hole yoke thing does just pull off, right? I imagine it's keyed, but it does just pull off?

Zachary Hoyt · Nov 1, 2011

Yes, it is keyed and it does slide right off. I've only had to take a couple apart and they both came pretty easily. If you have to you could take the 6 bolts out that hold the gear and shaft assembly and take the whole thing out where you can get at it better. You could probably put it in a press or even cut and crack the stuck collar off in the worst case. I can't remember if the input shaft has to come out first or not but it should be apparent once you get in there. Best of luck with it.
Zach

H Transmission Oil Seal

George Rausch

Member

Zachary Hoyt

Well-known Member

Similar threads