M Head Bolts

LonM · Oct 30, 2011

I just finished torquing the head bolts on an M and realized I forgot the throttle/governor linkage bracket. I need to take out two head bolts to install it. My question is, can I pull out just those two bolts and re-torque without loosening all the others, or am I better off to just loosen up the whole works and do it over? Thanks for any helpful advice.
LonM

M Hoffmann · Oct 30, 2011

I would just pull the two and retorque them let it sit a day and retorque all

luv2wrench · Oct 30, 2011

yep just do the two. if you really want a gold medal, retorque after you run the engine and re set the valve lash again. i ve had good luck with this procedure. If its just a toy, once is fine when you build it.

M Head Bolts

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

LonM

Member

M Hoffmann

Member

luv2wrench

Member

Similar threads