B seal holder

teddy52food · Oct 26, 2011

I need the pot metal seal holder for the belt pulley on a Farmall B. Local salvage yard is 20 miles away. He has a 6080-DA. Does that sound right?

LMack · Oct 26, 2011

I assume you are talking about the 3-bolt retainer at the end of the shaft (CIH # 48085DBX). A Picture may be helpful. You can go to Case International and get a complete parts list with diagrams. Are you sure you need the seal holder or do you need the shaft spacer that fits between the shaft and the seal (43630D)? FYI there is nothing but friction that holds this spacer in place and if you do not have a cover spacer (48087DB)or some type pulley on the shaft it is not unusual to loose the inside spacer. You need a cover spacer. See if the link below is helpful.
Untitled URL Link

teddy52food · Oct 26, 2011

This tractor was in a shed fire & that piece is partially melted. The rest is all there.

B seal holder

teddy52food

Well-known Member

LMack

Member

teddy52food

Well-known Member

Similar threads