International 350 one row chopper question

Deere Oliver Farm · Oct 24, 2011

I use this chopper for corn. I need to remove the sleeve that transmits power from the main gear box to the shaft that drives the chopper/pick up mechanisms. There is a pin that runs through this shaft. I think the splines on mine are worn and I have some corn wanting off the field. Thanks to anyone who can help!

JimB2 · Oct 24, 2011

Hi, never worked on a 350 but spent many hours on the older models 15 and 16. IIRC you have to take the pin out of the drive sleeve and the bolts out of the bottom of the fwd/rev gear case and slide the gear case toward PTO drive shaft far enough to allow sleeve to be removed.

What size tractor do you use on the 350 chopper?

JimB

Deere Oliver Farm · Oct 24, 2011

I use a John Deere 60 to chop with

International 350 one row chopper question

Deere Oliver Farm

Member

JimB2

Well-known Member

Deere Oliver Farm

Member

Similar threads