Belt pulley H

lblock · Oct 12, 2011

Need to know if a belt pulley from an H will fit an M also curious if any other parts will transfer over ?
Thank You

Larry O

rustyfarmall · Oct 12, 2011

(quoted from post at 12:56:58 10/12/11) Need to know if a belt pulley from an H will fit an M also curious if any other parts will transfer over ?
Thank You

Larry O

The pulleys will interchange, although the M usually used a pulley with a larger diameter than the H. Unless you are powering a threshing machine or something similar, the diameter really makes no difference.

lblock · Oct 12, 2011

Have an H thats junk but it has the belt pulley with a steel pulley on it .I wanna put it on the super M.Also is the gear that drives the pulley system allready inside the tractor or do I need that as well?

Thanks
Larry O

rustyfarmall · Oct 12, 2011

(quoted from post at 13:51:44 10/12/11) Have an H thats junk but it has the belt pulley with a steel pulley on it .I wanna put it on the super M.Also is the gear that drives the pulley system allready inside the tractor or do I need that as well?

Thanks
Larry O

The actual pulley will interchange. The entire belt drive mechanism WILL NOT interchange from an H to an M or Super M. Yes, the gear that drives it is already inside.

lblock · Oct 12, 2011

thanks alot

Larry

Belt pulley H

lblock

Member

rustyfarmall

Well-known Member

lblock

Member

rustyfarmall

Well-known Member

lblock

Member

Similar threads