Help with M Bearing Removal

Anonymous-0

Well-known Member
Got the M split, and the bearing on the hydraulic pump drive shaft seems real loose. Pulled the seal housing, and need some advice on how to remove the bearing from out of the front of the transmission. Does it pull right out, or is there a trick? Would like to replace it.
 
Put slotted nut back on part way, tap nut, shaft will move back a little. Then pry nut forward and the bearing will most likely move forward a little then you can get behind snap ring on outer dia of bearing and pop it off shaft.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top