424 wiring diagram

I 'am looking for the wiring diagram for this tractor,the one thats in the manual is a little vague when it comes to the dash connector,and wiring to the engine.The book shows wiring for a 4 wire voltage reg,and the tractor only has a three so ,little confused and looking to see a diagram? thanks steve
 
The three wire regulator bat terminal is wired to the amp meter load side with 10gauge wire. The L (4th) wire can be unused in the loom. The terminal it was hooked to at the dash (light switch probably)is connected to that same load side of the amp meter. That wire should be 10gauge also. Jim
 
I,am also wondering which wires from the male side of the dash plug feed the fuel pump and resister? The plug from the dash is mainly all i have the rest has been cut.I need to run wires to the fuel pump and resister,where should they be hooked up too? thanks
 
Hi Steve,

Someone posted the following link for IH electrical wiring diagrams. I don't know if they are better than OPS Manual or not.

http://external_link/wiring_diagrams/wiring_diagrams.html

JimB
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top