what is wrong

CAROGATOR · Sep 17, 2011

with these bars and levers? Just got this Super C and These bars and levers are in the way when trying to mount or dismount the tractor. Looked at 150 pictures on here and saw nothing that looked like this. Thanks, James

CAROGATOR · Sep 17, 2011

Forgot the pictures.

pete 23 · Sep 17, 2011

That is a will fit hitch. I don't think I would have a problem just taking the whole thing off, unless of course you intended to use that hitch when you bought tractor.

CAROGATOR · Sep 17, 2011

I intend to use a Bush Hog and box blade.

IH fan · Sep 17, 2011

(quoted from post at 13:48:10 09/17/11) I intend to use a Bush Hog and box blade.

That's just an aftermarket 3 point hitch that works off the Touch-control. If you intend to use a 3 point mounted mower(Bush Hog) on it, I guess you just get used to it. If you are going to use a pull type mower you don't need it. If yoou are using a 3 pont blade or box blade... you will need it.

Oldiron29 · Sep 17, 2011

Your SC should have live hydraulics. some SC have a bypass for fast hitch. You could power the 3pt with a hydraulic cylinder and remove the rods. oldiron29

CNKS · Sep 17, 2011

That's a relatively cheap 3 point. For about $800+ you can get a Saginaw 3 point that uses it's own cylinder in the rear and does not use the rods that are in they way.

what is wrong

CAROGATOR

Member

CAROGATOR

Member

pete 23

Well-known Member

CAROGATOR

Member

IH fan

Well-known Member

Oldiron29

Well-known Member

CNKS

Well-known Member

Similar threads