Snow Blade for Cub - maybe?

Brian G. NY · Sep 14, 2011

I Have a snow blade that is 54" wide and 15" high that I"m told came off a Farmall Cub.
It is made of fairly heavy material and definitely too heavy for the average large garden tractor.
I would like to sell it for $75 because I can"t really use it. There is some mounting hardware but it"s obvious that not everything is there.It can be picked up at my place which is 50 miles west of Albany, NY and 10 miles south of Cobleskill, NY

Jim in Ma. · Sep 15, 2011

As far as I know, The Cub blade was 48" wide.
The frame don't look quite rite.
Perhaps for an A or B ??

Brian G. NY · Sep 15, 2011

You may be right; the guy I got it from wasn't too sure himself.
The framework has been roughly "customized".
May have been used on some other make as well?
It's a nice rugged blade but not quite big enuf for my Allis WD but too big for my Ford LGT garden tractors.

Jim Becker · Sep 15, 2011

Cub blades were 54". That is the very early style Cub blade. The loose piece that can be seen in the first picture is off of a later Cub blade. If it only includes the parts in the picture, quite a lot would have to be found/made to be able to use it.

Any more pieces with it but not pictured?

Edit to add: Part of it appears to be assembled bottom side up. It wouldn't take a whole lot of additional pieces to belly mount (good for grading), but it really needs to be front mounted to plow much snow.

Brian G. NY · Sep 15, 2011

Thanks for the info.
I don't have any pieces except what's shown.

Snow Blade for Cub - maybe?

Brian G. NY

Well-known Member

Jim in Ma.

Well-known Member

Brian G. NY

Well-known Member

Jim Becker

Well-known Member

Brian G. NY

Well-known Member

Similar threads