(800) 853-2651
SHOP NOW

C/Super C Farmall Question

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

L

LWW

Member
Does anyone know the bolt size for the three holes in a triangle on each side of the front of the tractor for mounting cultivators? Any help will be appreciated.
 
They were special bolts with the under side of the head rounded. I'll look in the morning but think the bolts are on the order of 3/4 fine. Someone else will probably know the exact threads. Been many years since we've had the culti. on the SC.
 
As others have said, 3/4" coarse, I believe. The back of the head was tapered to help line things up and firm up the attachment, but I would think you can get the job done with a regular bolt and a lock washer if needed.
 
(quoted from post at 08:36:56 09/14/11) As others have said, 3/4" coarse, I believe. The back of the head was tapered to help line things up and firm up the attachment, but I would think you can get the job done with a regular bolt and a lock washer if needed.
Click to expand...
The mount on the cultivator was "double drilled" with a hole large enough to fit over the bolt head, then slid to the smaller 3/4" hole which was countersunk to match the tapered back side of the bolt head. I'd bet the bolts are still available from a dealer. If I remember right, one end of the wrench that came with the tractor fit the bolt head.
 
You must log in or register to reply here.

Similar threads

H
Farmall Super C
Replies
2
Views
393
rustred
rustred
F
Farmall c help
Replies
5
Views
380
BarnyardEngineering
BarnyardEngineering
I
Farmall C Demonstrator
Replies
19
Views
1K
Janicholson
Janicholson
R
Super C bull pinion gear retaining washers/bolts
Replies
12
Views
348
300guy
3
R
Super C disc brakes
Replies
11
Views
387
Levi81
L
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top