706 clutch

D1206 · Sep 8, 2011

Just picked up a new clutch assembly from our local CaseIH dealer,its a hi-capacity unit.How do I tell which way the disk sits in relation to the pressure plate as there are no markings on disk sayin flywheel side.Was lookin at the old disk and it seems the torsion springs went toward the pressure plate,but I cant say for sure.I put a clutch disk in wrong way on a 915 separator drive years ago so I know there is a right and wrong way,thanx in advance

Bob · Sep 9, 2011

Iff'n you put good money down and bought parts, the LEAST they could do is include basic instructions.

I'm think'in I'd make a phone call or two before deciding how things should be and roll'in 'er back together!

stumper · Sep 9, 2011

my pics show the springs toward the presure plate,actualy into the center hole. if backwards the springs might hit the flywheel.

Owen Aaland · Sep 9, 2011

(quoted from post at 02:49:11 09/09/11) my pics show the springs toward the presure plate,actualy into the center hole. if backwards the springs might hit the flywheel.

Not might, will!

706 clutch

D1206

Member

Bob

Well-known Member

stumper

Member

Owen Aaland

Well-known Member

Similar threads