Fast hitch cylinder stop

Rick Remmert · Sep 7, 2011

I went to the local Case IH dealer to see if he could get me a stroke limit collar #360-380-R91. He tried all the part numbers in that section of the parts book. He could not do me any good. I have the 3/8 dia. limit stop valve. It looks like I am down to making one unless someone on here knows where one can be had. If I had the dia. of the flange, the rest I can figure out enough to make one. Thank-you for your time.

Andrew Z · Sep 7, 2011

You could get clip on stop collars at TSC, they come in a pack of 5 or 6 around 20 bucks. Not the factory stop collar but works well.

Andrew

rhtx55 · Sep 7, 2011

The originals come in three pieces, two make up the collar, one the clamp.

Top collar - p/n-360372R1
Bottom collar - p/n- 361010R1
Clamp - p/n - 361087R1

Have them try these numbers to see what they can come up with.

Janicholson · Sep 7, 2011

Google images - Split Shaft Clamps
Millions. All it would take is the correct ID - OD, or a brazed on tab. Look good as well. Jim

Achodges1 · Sep 7, 2011

Try a place that rebuilds hydraulic cylynders. I started getting my dealer parts from Messicks. Check out the website, look up the part number,place an order or give them a call. I"ve ordered parts from them other dealers said were not available.

Allan in NE · Sep 8, 2011

Hose clamp and a small strip of flat iron bent in a 90° angle.

Allan

Fast hitch cylinder stop

Rick Remmert

Member

Andrew Z

Well-known Member

rhtx55

Member

Janicholson

Well-known Member

Achodges1

Member

Allan in NE

Well-known Member

Similar threads