Good morning Guys :
How are ya?
This is my project for today:
The Farmall M that I bought The light harness is really screwed up. The man that I bought the tractor from has taken out the light control knob and switch and the wiring is gone: But that is ok. Because I have another switch but it is a OFF/ON switch that will work for now. This is what I want to do so tell me if it will work ok:
1. I want to take one wire from all three gages { THE LIGHT} Wire put in a inline fuse
And take it to the switch:
2. I want do the same with all three lights, the two head lights and the working back light.
And take it to the switch, and add a inline fuse.
3. Then I want to go from the other side of the switch and go to the power source.
The reason for doing this is because if it is dark enough to use the back work light it is dark enough of use all of them. YA OR NA;
By the way Guys I am no ARTIES but I get buy.
MANY THANKS
JR FRYE
