Help ID'ing mower

JoeVT · Aug 28, 2011

Looking for help id'ing the model number of 2 point mower that came with my "new" super C so I can track down a manual. Thanks

Jim Becker · Aug 28, 2011

It is one or another variation of the C-21, probably a C-21P.

Rick Remmert · Aug 29, 2011

Iam kind of new to this also. The guys on this forum know more about this than I do. Mr. Cowman sent me a picture of the C-21 and the first thing I notice was the slip clutch flywheel is offset to the side of the pitman arm flywheel. Yours is one above the other. I have a 34-F24 that is for the fast hitch of a 300 or 400 Farmall. I think what you have is maybe a 2C-F24. I am in the middle of converting it work on the Super C. The only difference I see right away is the tension springs. I have 2 of them in tandem and you only have one. You also have some sort of shield over the pitman head and clamp. There has to be someone on here that has one of these and can tell you for sure. Anyway, Binder Books has all the manuals you will need.

William Eccles - Jardine · Aug 31, 2011

Your mower is from the A-21 & C-21 mower series I have the
original book for that sreies for setting up them the only
diferenceis that yours has a drawbar & mounting plate for a
supper A/C quick hitch setup some had two springe for counter
ballancing the knife and some had one; depending on the length
of the bar 5.6 or 7 foot bar and whether they were manual lift or
power lift. Usually the manual lift had a leaver with a catch and
one needed the exra help to even lift a 5 foot knife. My right arm
becomes very tied after a day of trimming with ther manual lift.
The guadr is part of the mower bar atachment. You are welcome
to write me with your adress and I will coppy my manuel if your
can't find one. email [email protected]
must sign off now in a lightning storm.
Wm.

Help ID'ing mower

JoeVT

Member

Jim Becker

Well-known Member

Rick Remmert

Member

William Eccles - Jardine

Member

Similar threads