Engine parts for A

Help! Need to find engine parts for my model A. Need oil pump, timing gears, tappets, camshaft and connecting rods. Thanks!

[email protected]
864-303-4536

Tobin

check this site have had great luck

(quoted from post at 18:49:22 08/15/11) Help! Need to find engine parts for my model A. Need oil pump, timing gears, tappets, camshaft and connecting rods. Thanks!

[email protected]
864-303-4536

Tobin

Click to expand...

If you really need all those things, then you are much better off looking for another engine to replace yours or use the parts from. Things like the Oil Pump are usually more expensive than an entire engine. But if you are set on buying all these individually, there is a set of rods on ebay, item #320656758364

http://cgi.ebay.com/farmall-c-super...omain_0&hash=item4aa8a1d65c#ht_500wt_1054

Did not see a link or website.....?

He is referring to the website which hosts this forum. Scroll to the top of the page and you should see something that says "tractor parts - click here". Sam

Oh! I did look.....they do not list things like rods, oil pump, cam and tappets. Also called them...they are the ones who told me to post hear to look.

(quoted from post at 12:17:59 08/16/11) Oh! I did look.....they do not list things like rods, oil pump, cam and tappets. Also called them...they are the ones who told me to post hear to look.

Click to expand...

If you truly do need a New oil pump, they are available, but well over $1000, is there really anything wrong with yours? These engines, aren't like Small block chevys, where you replace the oil pump at every rebuild because they only cost like $40. I know rebuilt cams and tappets are available and I can get them for you, but you are looking at between $450 to $500. Then Connecting rods are going to be fairly expensive too, but there is that set on ebay. Why are you replacing all these parts, this is a fairly low RPM engine, and nothing so catastrophic should have happened that wiped all this out, if it did, you would need a new block anyway. I really think you should just look into another engine, if you really need all these parts and then transfer them over to your original block if you want it to be the original block.

From what I am reading, it seems that you are used to rebuilding automotive engines, and just think that it is normal to change all these things with a rebuild on these tractors, but it is not. I have had customers like this before, and I really try to convince them not to waste so much money when it is not necessary. Cam and tappets may be a decent idea if yours are really worn but I would not replace the Oil Pump and Connecting rods, unless they really are damaged.

I have one rod that is bent....cam and tappets mike out as being no good...I did find a tractor that I am going to look at this weekend...maybe I can get all my parts off it. If not I will see if I can get a price from you. Thanks.