IH toplink pin

dean barnes · Aug 11, 2011

Can someone measure the funny looking toplink pin that fits my IH 454 and 784? the same pin fits both tractors. it looks like it might be a category II on one end and category I on the other. thanks

DanR · Aug 13, 2011

Any style pin will work if it's the right diameter and length. Yours is probably 3/4" X 3 or 4".

scotc · Aug 13, 2011

No, it's a funny pin. Has two holes if I remember right. One side of the top link bracket is cat 1, the other side is cat2, and it only goes in one way. There is a step in the pin, so if you are running a cat 1 top link, it stops against the link eye, and if you are running a cat 2 link, it stops against the other side of the bracket. CIH used the same pin on the 95s and 4230, 4240, etc.

wolfman · Aug 14, 2011

Yep. scotc is right on.

wolfman · Aug 14, 2011

Yep. scotc is right on.

IH toplink pin

dean barnes

Member

DanR

Member

scotc

Well-known Member

wolfman

Well-known Member

wolfman

Well-known Member

Similar threads