Super H throttle/governor

IAtractorKid · Aug 10, 2011

Hey guys! Still tinkering with my SH that I just got back together. Having a little trouble with the trottle. I really have to push hard to get it all the way forward and pull really hard to get it all the way back. It is nice and easy to operate in the mid-range. I had all the linkages apart so maybe I dont have them adjusted correctly or should I be looking into the governor? Thanks for any help!

Janicholson · Aug 10, 2011

Take the control rod off of the governor (back side) and move it through its full range. if it is sticking or very hard to move it is internal. If it just has evenly increasing spring tension from end to end it is in the linkage. Jim

IAtractorKid · Aug 11, 2011

If it happens to be internal, what do I check or do? Thanks!

Janicholson · Aug 11, 2011

First get a IT or International repair manual. Then follow it inside. Sorry, the best information is not going to be through the net. This is a safety related item, and needs real care. Jim

Super H throttle/governor

IAtractorKid

Member

Janicholson

Well-known Member

IAtractorKid

Member

Janicholson

Well-known Member

Similar threads