Keith 44 2N
New User
Where would i find the casting codes for a Farmall A engine block - and once you point them out how are they decoded for month, day, year ect. Thanks, Keith
- Thread starter Keith 44 2N
- Start date
Anonymous-0
Well-known Member
You can download a catalog from www.oemtractorparts.com. Not only will you have a catalog of their products but also good information like casting codes.
K-Mo
K-Mo
I don't see this mentioned here often - but if you pull your valve cover, the head should be stamped with the date in a readable from like oct 10, 1948
That could of course be a replacement head, and you're probably looking for more info than just the head casting date - but figured it was worth mentioning anyway.
It's a good double check to see if you deciphered the numbers correctly.
That could of course be a replacement head, and you're probably looking for more info than just the head casting date - but figured it was worth mentioning anyway.
It's a good double check to see if you deciphered the numbers correctly.
Hendrik
Member
This link may help you. There are numerous other posts/replies in the archives on casting codes, part numbers, etc. by, among others, our late friend Hugh McKay .
HTH, Hendrik
Casting codes, etc.
HTH, Hendrik
Casting codes, etc.
gene bender
Well-known Member
The code should be behind the steering shaft as thats where mine is almost all engines thats where it will be. Looking at the block lower right side just above the pan towards the front.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy