(800) 853-2651
SHOP NOW

mounted corn picker on 560 farmall

You will need a book/ manual to get the stands under the side units in the right holes. If it is a fast hitch frame, you need to remove the fast hitch assembly from the 560. There are 2 brackets which clamp to the outer part of the axle castings---leave these loosish until the sub frame gets lifted for the first time---they need to intercept 2 knobs on the sub frame.
A super-snoot is nice to have for cooling purposes.
 
i agree get a manual! i had mounted a number 34HM-20 picker on an h. also try the corn picker forum. do a google search. i guess you bought the picker and tractor? any pictures?
 
Foppe Years ago I mounted many 234 picker on many different tractor, even put one on a ford 6000. Too long ago to help without manual. Once you get in mounted and working you can dismount just to check the oil in the tractor, it is that simple. Good luck.
 
Aces reminded me of the commercials on radio in the late '50s that said you could mount a 2MH picker in 45 minutes. Welllll, you might have been able to, if all the mounting holes were drilled out to 3/4 inch [1/2 jnch bolts] & you didn't mount the elevator.
Also helped to have 4 guys around.
 
You must log in or register to reply here.

Similar threads

M
Wd 45 mounted corn picker.
Replies
9
Views
587
4wdtom
4
M
M has no spark
Replies
11
Views
554
used red MN
U
C
Unknown corn picker model
Replies
8
Views
802
Absent Minded Farmer
Absent Minded Farmer
M
M has no spark
Replies
14
Views
588
wh
wh
M
Farmall M belly pump
Replies
3
Views
295
the tractor vet
T
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top