Need SA steering parts

Anonymous-0 · Jul 31, 2011

I am working on the steering for my 1949 SA. I need one tie rod tube, Part # 57-869-DA and one Tie rod ball seat, Part # 43-468-D. The seat is the one that goes in the adjustable tie rod end that connects with the front axle steering arm. It is different than the seats that are in the center steering gear arm.

My email is open so if you can help me out, please let me know.

Thanks.

old · Jul 31, 2011

I wonder if those parts would be the same as on the A. I have bits and pieces of a front end off an A that had a fight with a tree and lost so I may have what you need here

Anonymous-0 · Jul 31, 2011

If the front end has an adjustable width axle, I suspect they would be the same. My parts book does not cover the A...only the SA...so I can't tell if they are the same or not.

Perhaps another reader that is familiar with both models can help answer the question.

old · Jul 31, 2011

Well the A and the SA from what I have seen both have the adjustable wide fronts and I know the stuff I have looks the same as the front of the SA that we got when we got this A just the A was to bad after rolling down a big hill and hitting the tree to be able to fix so that is why I did the BA. By the way due to the fact I had to use the trike front the BA has 5 tires on it. Duals on the left side rear which makes it look sort of odd. LOL

JRSutton · Jul 31, 2011

I've set a link to a place that has the tie rod ball ends I believe you are referring to (see link).

Just don't buy the last one, I need one too!

They should have the other parts, but if not, try this site (ytmag) first, or external_link
tie rod components

mikeintn · Jul 31, 2011

Doug if you havent found them let me know and I'll look I think I may have them. Mike

Anonymous-0 · Aug 1, 2011

Mike,

Haven't found them yet. Please take a look and see if you have them.

Thanks.

mikeintn · Aug 1, 2011

Doug I do have them, you can give me your address and I;ll put them in the mail for you 20 bucks if thats ok just a little something for shipping and taking them to mail,you need one tie-rod with the ball on it and the little concaved cup that goes against the ball? or you cam email me with it. Thanks Mike [email protected]

JRSutton · Aug 1, 2011

Not to interrupt your transaction with Mike here - but in case anybody else is looking for the same thing - I posted a link earlier for the concave seats. Here's a link to a site the carries the entire assembly.
Tie Rod Ends

Need SA steering parts

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

Anonymous-0

Well-known Member

old

Well-known Member

Anonymous-0

Well-known Member

old

Well-known Member

JRSutton

Well-known Member

mikeintn

Member

Anonymous-0

Well-known Member

mikeintn

Member

JRSutton

Well-known Member

Similar threads