Farmall MD mw hydraulic pump

Matt Jordal · Jul 21, 2011

I'm wanting to put an engine driven hydraulic pump on my MD, and was originally thinking the 400/450D pump and timing covers. I was told m&w made a pump to fit the original covers, but the ports come out the top where the generator mounts, is there no issue there or does the generator get moved up or what? Haven't been able to find any other info. Thanks.

Brad Motheral · Jul 22, 2011

some guys move the generator to the other side. i changed to an alternator.

sflem849 · Jul 22, 2011

You could probably put 90 degree fittings out of the pump and clear it. I have never seen an M&W pump on an MD...yet.

D Slater · Jul 22, 2011

MD engine serial # 19282 and higher used the same bolt pattern front cover as SMD to 450D.
M&W used two pumps for MD tractors. # 203PX before 19282 and # 204PX after. Engine numbers 19282 and higher were used in some last year MD tractors so you probably have the more common early cover.

Matt Jordal · Jul 22, 2011

My tractor does have the early covers, engine serial number is 12618. Did M&W supply a bracket in the kit to mount the generator on the left side? I was trying to leave the tractor as original as possible, but an alternator upgrade would be nice also.

Wilson · Jul 22, 2011

Dosen't the MD hyd turn opp. of the gas??

Wilson · Jul 22, 2011

Dosen't the MD hyd turn opp. of the gas??

sflem849 · Jul 23, 2011

(quoted from post at 18:22:32 07/22/11) Dosen't the MD hyd turn opp. of the gas??

Doesn't matter for the M&W pump. There was some talk about that a little earlier this week.

Farmall MD mw hydraulic pump

Matt Jordal

Member

Brad Motheral

Member

sflem849

Well-known Member

D Slater

Well-known Member

Matt Jordal

Member

Wilson

Well-known Member

Wilson

Well-known Member

sflem849

Well-known Member

Similar threads