kn filter

Dougct · Jul 10, 2011

Does anyone have a part number for a K&N filter that will fit direct on to the end of a H carb.Or is there one?

scotc · Jul 10, 2011

Why? All it is is a version of the air cleaner that's there, just made to fit where a paper filter goes.

Dougct · Jul 10, 2011

because...i need to cut 75Lbs off the tractor for pulling.Thanks

FORD 1710 · Jul 10, 2011

You would be better off finding a plastic air box / filter from a car with multi port injection. Someting like a V6 Dodge Spirit / Plymouth Acclaim. These come with a hose fitting that can be adapted to what ever carb you have.

In the long run, KN = rock stopper. Not a filter for fine dust.

rustyfarmall · Jul 10, 2011

(quoted from post at 11:27:40 07/10/11) because...i need to cut 75Lbs off the tractor for pulling.Thanks

That oil bath air cleaner weighs only about 10 pounds? or less, but you probably already knew that. If you've already dropped the belly pump, removed the belt pully drive, removed the PTO, and installed a single wheel front end, there just isn't much more you can do without investing some dollars.

DeltaRed · Jul 10, 2011

he needs a single front with a pressed steel center.the old cast center would be as heavy-or heavyier than the tricycle front.

rustyfarmall · Jul 11, 2011

(quoted from post at 15:11:44 07/10/11) he needs a single front with a pressed steel center.the old cast center would be as heavy-or heavyier than the tricycle front.

Correct!!

kn filter

Dougct

Member

scotc

Well-known Member

Dougct

Member

FORD 1710

Member

rustyfarmall

Well-known Member

DeltaRed

Well-known Member

rustyfarmall

Well-known Member

Similar threads