Farmall M Hydraulics

Steve_E · Jul 2, 2011

Found a diagram on the site once showing how to hook up a two way valve to the lift-all system on an M, but cant find it now.
Im going to tackle that one after I get my brakes working - anyone still have a digram or some photos?
Thanks,
Steve

farmallboy15 · Jul 2, 2011

why dont you just get the original IH 2way valve for the liftall? there are plenty of them on ebay.

minnemoman · Jul 2, 2011

you just have to run one hose from the elbo on the right side or the forward left side to the in side on the valve, and the return from the valve goes to the T fitting you have to put on the inlet for the resavore.

good luck and have fun

Steve_E · Jul 2, 2011

I keep bidding, but lose them at the last minute - gonna keep trying.

sflem849 · Jul 3, 2011

(quoted from post at 07:12:42 07/02/11) why dont you just get the original IH 2way valve for the liftall? there are plenty of them on ebay.

You still have to plumb that in the same way. All 2 way valves have the same fittings, some are just in different spots.

Farmall M Hydraulics

Steve_E

New User

farmallboy15

Member

minnemoman

Member

Steve_E

New User

sflem849

Well-known Member

Similar threads