H Farmall (Steering Problem)

Urban Boland · Jun 29, 2011

I have a problem with my H Farmall. It shimmies at high speeds. Is there an adjustment or a way to correct this problem?

rustyfarmall · Jun 29, 2011

(quoted from post at 14:40:30 06/29/11) I have a problem with my H Farmall. It shimmies at high speeds. Is there an adjustment or a way to correct this problem?

No adjustments. It is flat worn out and needs new bushings and bearings.

Anonymous-0 · Jun 29, 2011

You might try less air pressure in one front tire.

GordoSD · Jun 29, 2011

Start at the steering wheel and work your way down to the front wheel bearings. Or vice versa.

Janicholson · Jun 29, 2011

In the Archives here there are hundreds of repair posts on this topic. Look for lost motion first, fix the easiest loose parts. the caseih.com website has parts layouts. Jim

Ken Ind. · Jun 30, 2011

Mine did that and I tightend up the big nut in the bolster and the shimmy went away.

sflem849 · Jun 30, 2011

(quoted from post at 00:42:05 06/30/11) Mine did that and I tightend up the big nut in the bolster and the shimmy went away.

The one on the front of the steering wheel shaft?

john d · Jun 30, 2011

Take the hood off, and go for a drive. Watch for movement in the steering shaft. Common causes are the universal joint in mid-shaft, the little ball bearing behind the nut at the front of the steering shaft, bad wheel bearings, worn sector gear in the top of the bolster, and even loose bushings in the bolster itself. In my experience, the ball bearing at the front of the steering shaft where it terminates was the culprit.

H Farmall (Steering Problem)

Urban Boland

New User

rustyfarmall

Well-known Member

Anonymous-0

Well-known Member

GordoSD

Well-known Member

Janicholson

Well-known Member

Ken Ind.

Member

sflem849

Well-known Member

john d

Well-known Member

Similar threads