560 belt pully gear

BUCK CLAYTON · Jun 28, 2011

Will 560 D belt pully gear work on M? Thanks much

Charlie M · Jun 28, 2011

Not sure - we had a dealer try to move the belt pully off a H onto a 350D and it wouldn't fit. I don't know if something is different because of the TA. I was only about 10 at the time so its been a long time since the attempt was made.

Larry M · Jun 28, 2011

Nope, Bolt pattern is wrong .

rustred · Jun 28, 2011

as far as i know they look the same visually and dont see any reason for them not to fit each other, since the 560 was a copy of the w6 which is the m's brother.

John M · Jun 28, 2011

If youre talking about just the drive gear, yes, they have the same part number according to CaseIhs website.

Owen Aaland · Jun 28, 2011

(quoted from post at 15:27:49 06/28/11) Nope, Bolt pattern is wrong .

?????? They use the same gasket.

rustred · Jun 28, 2011

the H and W4 would be the same , but the 350 i believe used a rear mounted pully which is totally diff.

Charlie M · Jun 28, 2011

The utilities used a rear mounted PTO but the row crops had one under the tank. I've seen tractors with them on it.

rustred · Jun 29, 2011

thats correct. i was thinking utility model.

Harold H · Jun 29, 2011

The Farmall M belt pulley will work on M, SM, SMTA, F400, F450, and F560. A Farmall H belt pulley will work on H, SH, F300, F350, F460. Utilities take a different belt pulley assembly.

Harold H

560 belt pully gear

BUCK CLAYTON

Member

Charlie M

Well-known Member

Larry M

Member

rustred

Well-known Member

John M

Well-known Member

Owen Aaland

Well-known Member

rustred

Well-known Member

Charlie M

Well-known Member

rustred

Well-known Member

Harold H

Well-known Member

Similar threads