Gas gauge for 140

Bus Driver · Jun 25, 2011

Has anyone determined the depths of fuel for each gallon in the 140? For example, one gallon would be probably some fraction of an inch and each additional gallon would be an additional amount, but not necessarily the same depth change for each additional gallon. I hope to mark a wooden stick for the gauge.

NawlensGator · Jun 26, 2011

I've used 140's for about 30 yrs. I just look in the tank to see if it needs gas. You could start with an empty tank and add a gallon at a time marking your stick after each. I would mark in 2 gal increments.

Bus Driver · Jun 28, 2011

That may be my only choice. I hoped that someone had already done it and could share the information.

mkirsch · Jun 28, 2011

Someone probably has, but odds are that person doesn't visit this website and/or is dead.

Fortunately it's only about 15 minutes worth of work and not terribly complicated at that.

Gas gauge for 140

Bus Driver

Well-known Member

NawlensGator

Member

Bus Driver

Well-known Member

mkirsch

Well-known Member

Similar threads