(800) 853-2651
SHOP NOW

GE Light Bulbs

A

Anonymous-0

Well-known Member
What is the part for the steering post mounted lights on a '43 H, 6 volt system? Is it 1133? Can the reflective bulb mounting plate still be had, or should I just paint then with a high gloss white enamel implement paint?
 
I don't have the bulb number in my head, will say it costs about 5 bucks if you get the correct one. Others will fit but not correct. I sand blast the old reflector and spray it with silver or aluminum paint. I also add a ground wire (solder one on the bulb socket) to get a good reliable light. Not the brightest but reliable.
 
(quoted from post at 09:29:46 06/23/11) What is the part for the steering post mounted lights on a '43 H, 6 volt system? Is it 1133? Can the reflective bulb mounting plate still be had, or should I just paint then with a high gloss white enamel implement paint?
Click to expand...

1133 is the correct number for the 6 volt bulbs, and yes, the reflectors can still be purchased brand new. The reflectors come with a 6 volt bulb already in them, but it is NOT an 1133 bulb.
 
Thanks guys. I should have looked online before posing the replacability of the reflectors. Everyone has them. Kevin
 
You must log in or register to reply here.

Similar threads

A
Pan cake head light cans
Replies
6
Views
848
randy hall
R
bmaverick
Headlamps flickering then quit working, finally solved.
Replies
0
Views
203
bmaverick
bmaverick
L
Light Bulbs for 6 Volt System
Replies
10
Views
989
gene bender
G
Charles in Aus.
A Christmas memory
Replies
2
Views
399
SDE
S
C
wiring lights on a 100
Replies
3
Views
561
gene bender
G
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top