h farmall manifold

Try ebay. Just put in Farmall H manifold and a bunch come up. There's one guy that wants 200 for a broken one hahahahahahaha. Don't know what he's on but there's some used and some new for a lot less than that.
 
(quoted from post at 18:45:25 06/22/11) yes saw the 200 dollar used one I can order a new one for 139.

You'll have to buy the $3 pipe from Menard's, too. You better figure that into the price. :lol:
 
The after market manifold is made for H and Super H so it has a slotted mount for carburetor. I have one on one of my H tractors and it seems to be more difficult to get a consistent nice idle. You set it so it idles nice at the lowest end and it tends to be rich at a moderate speed. It may be my carburetor but I attribute it to the difference in throat of manifold to carburetor.
 
Buy a new one. The new one has better flow and is not restricted with rust and pit marks which cause poor flow. The tractor will run like new again,I've gone both ways and the new manifold was without doubt the best investment,you have a new surface for the gasket and the performance justifies it.As was stated,they are slotted to accept any size carb body.I had a distillate manifold welded,ground flat,tons of work, had the surface planed,spent more than a new one and still had an old welded manifold.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top