Farmall A PTO

tinny · Jun 22, 2011

Can you still get the gaskets for the pto to trani and belt pully drive to pto?
Also what is the speed of the belt pully compared to the pto.

CNKS · Jun 22, 2011

Yes to the first question, belt is faster, I don't remember the number. You can still get virtually all seals, bearings, and gaskets for any letter series and later tractor.

Tyler Jackson · Jun 22, 2011

You can get em on this website or go to a CaseIH dealer and they can get you anything you would want as far as paint, gaskets, and seals go.

JRSutton · Jun 22, 2011

the belt pulley speed, with no load, is 1272rpm
And the pto speed is around 540rpm (don't quote me on that one, but in that ballpark).

That's at an engine speed around 1500rpm (again - going from memory on that one, but I think that's close)

D7 fever · Jun 23, 2011

if you are putting a belt pulley drive on the tractor for the first time, you might need shims, if it is already on there it probably has them.

Farmall A PTO

tinny

Member

CNKS

Well-known Member

Tyler Jackson

Member

JRSutton

Well-known Member

D7 fever

New User

Similar threads