(800) 853-2651
SHOP NOW

IH 300 Row Crop Shifting

J

Jay Rider

New User
I had to replace a rear axel on my 300R, this requires disassembling a good part of the tractor, we got it back together and the shifting is messed up, have aligned the shifting bars for neutral (all slots align) but it won't go into neutral, or shift properly.
I am thinking that one of the forks is misaligned
Is there an easy way to get them aligned? With that heavy steel cover (floor cover) it is difficult to see as you lower it?
ANY TRICKS ANY OF YOU GUYS HAVE?
Thanks Jay
 
Assuming that the shifter tip is in the Neutral slot: Lowering one side earlier than the other on that deck, such that with a good light and eyes, you can assure the forks are on the slider grooves does the trick. Jim
 
Thanks Jim, I took it back apart ( nothing else to do on this rainy day) and the middle fork missed the slider grove when we lowered the deck.
I picked up this little 3/16" fexible LED light for 99 cents..that worked perfect to see down there.
BUT one thing that I noticed was one of the gears,had some wear about 1/8" off the front (think it was 3rd gear).
How hard would it be to change out that gear as long as the deck is off? Would I need to split the tractor?
Thanks again.
 
You must log in or register to reply here.

Similar threads

D
Getting transmission forks aligned
Replies
17
Views
2K
Rich'sToys
R
K
Farmall 300 Row Crop IPTO Change Out
Replies
4
Views
1K
BarnyardEngineering
BarnyardEngineering
crsutton81
Farmall 300 row crop
Replies
7
Views
1K
crsutton81
crsutton81
C
504 IH shifting problem
Replies
4
Views
996
Citrus Farmer
C
K
300 Row Crop Brakes
Replies
4
Views
462
SDE
S
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top