Tractor seat wear

Anonymous-0 · Jun 20, 2011

What is the best way to fix the wear and wobble on my 300 Farmall seat? The rods are worn as well as the holes. Are offset bushings available?

rustyfarmall · Jun 20, 2011

(quoted from post at 06:44:51 06/20/11) What is the best way to fix the wear and wobble on my 300 Farmall seat? The rods are worn as well as the holes. Are offset bushings available?

Unless you have a seat that was not original to the tractor, I can't think of any rods that would be worn out. The original seat sat on top of the battery box. Is yours like that?

S2710 · Jun 20, 2011

If you are talking about the flip over seat with the two rods that are wore, you can drill it out to a larger size pin or weld the hole shut and redrill or weld some washers on and put on new rods.
Bob

Anonymous-0 · Jun 20, 2011

If you have a 300 they make new seat pivot support rods with rubber bushings. You can buy just the rubber bushings. You most likely wiil need new schock bushings or maybe complete schock with bushings. You can get them through Steiner tractor Parts, CaseIH,and O.E.M. Tractor Parts.

Tractor seat wear

Anonymous-0

Well-known Member

rustyfarmall

Well-known Member

S2710

Well-known Member

Anonymous-0

Well-known Member

Similar threads