ih 80 combine

scotty-mn

Member
I just bought an ih 80 combine it is missing these 2 pulleys and the bracket they mount on. Any body have a parts machine?

I am also wondering if this combine is worth getting going again it is in decent shape.
I will post pictures of it shortly.
TRA-No80Combine-14.jpg
 
I hope you find what youre looking for? some of the 303 403 503 straight heads did use the same thing, although some were belt drive and some were chain drive. I sure wish i could find something like the 80 or maybe a 150. Almost impossible to find in northern MN. I would also be interested in a 140 eng or pto. Maybe you can steer me in the right direction!
 
Looking at your photo again...It"s the same drive as my 230 ih windrower. The 210 and the 175 would be the same. Good luck. Lemme know if you need help I know where there is a junk 210 and 175.
 
Nice looking IH-80. I would restore it. They are hard to come by any more. I looked for two years before I found one that was set up for wheat. Most in Michigan were set up for beans with the spring tooth cylinder and were totally shot. good luck
 
What they are is idler pulleys with brngs & pulley riveted together, IH used this set on a lot of their belt drives, 1 pulley was for the flat side or back of v-belt, the other of course was for the v-side, approx 6 to 8" in diameter, usually 5/8" bolt hole. If my memory serves me 101/151/615-915 had these in the elevator drive on outside upper end of elevators.
 
You should be able to either find good old ones, or purchase new from Motion industries or other pulley/gear seller. Jim
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top