BA is very close to being a work tractor now

old

Well-known Member
Well for the last couple days I have been tracking down a few small problems with the BA and the sickle bar mower. First off found some leaves in the gas tank so found out why it would run good then all at once try to die out on me and come back again. As for the sickle mower a set of new sections on it fixed most of the problems with it. Do need to fix the swather board which I think is fixed but not back on and tested yet. Maybe the fact I took it off a JD mower might be the problem with it. LOL One thing I will need to figure out is how to lift the bar with a cylinder since the lift is hand and I have to use my bad arm to work it and that does not work well
 
Hey Old, Glad you located the running problem.
I never did like those wooden swath boards. Make you one out of rod, one end longish and bent with a shorter end down by outside head. Will work good and be easier to lift.
 
The one I have is all metal. The main part which if off the JD is like a wooden one but made of metal and then I added a couple of slick rod to it and that seems to work ok but the tall stuff likes to hang on for longer then I like
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top