F 12 rear wheel clamps

Bill in NJ · Jun 7, 2011

I have an F12 that rear the wheels are off nd the rims are off of the cast wheels. I see there are two different types of clamps, inner and outer, for holding the rim to the wheel. Not sure which goes where. It would depend on which way the wheel is on the axle. Can anyone give me a clue as to which way these clamps go. Thanks, Bill

Dave Allgire · Jun 8, 2011

There are two different clamps. 5368D is the inner clamp and 5369D is the outer clamp. The inner clamp has two "feet" on it. The outer only has one. Assuming the hub of the cast center is toward the outer end of the axle, the inner clamp with two feet when tightened keeps the wheel in alignment with the cast center. The outer clamps, when tightened evenly all the way around, center the rim on the cast center. Tighten the outer clamps in a criss-cross pattern and you will end up with even spacing between the rim and the cast center.

F 12 rear wheel clamps

Bill in NJ

Member

Dave Allgire

Member

Similar threads