Farmall H steering pedestal needed

Yooper Farmall · Jun 7, 2011

I"m looking for a steering pedestal for a Farmall H. I have a "41 with the starter button located low and behind the pedestal, there was a hole drilled through the pedestal for a foot peg to push against the starter button. It was cracked when I got the tractor and broke last weekend while plowing. I have a bracket to mount the button higher on the left side of the pedestal. In Southeastern Michigan, any suggestions?

Zachary Hoyt · Jun 7, 2011

I think I have one, I will have to look tonight. I'm sending you an email.
Zach

caterpillar guy · Jun 7, 2011

Just make one out of a piece of pipe. Weld the top back on and the bottom plate. If you use a tubing cutter it will fit good at both ends. The switch bracket can be welded on too. the few holes like for the light switch/ fuse box can be drilled easy.

Nebraska Cowman · Jun 7, 2011

I have several of them. But I suppose you want it yesterday? You could slide a pipe over it and weld it for temporary

DeltaRed · Jun 7, 2011

FIX IT! "vee' it,weld,and grind it back smooth,piant it and no one will ever know!

Yooper Farmall · Jun 8, 2011

I can wait. I welded it up with some angle iron reinforcement to finish plowing and it isn"t pretty, but it"ll last until I get a new one. Interested in a pedestal in good shape, this tractor might just get a new paint job and make its way to a parade or a show or maybe both.

My email is listed, thanks.

Farmall H steering pedestal needed

Yooper Farmall

Member

Zachary Hoyt

Well-known Member

caterpillar guy

Well-known Member

Nebraska Cowman

Well-known Member

DeltaRed

Well-known Member

Yooper Farmall

Member

Similar threads