113-123-135 engine ID

Anonymous-0 · May 22, 2011

I see the scrapper has a bunch of IH on his trailer, there is a combine or baler engine with an angle drive, wondering how to tell one from another. Would pick it up if it's one of the bigger models. What's the big one that almost fits in a C, 152, 153, something like that? One of the cadavers on his load was a wide front C that had been reversed and placed on some sort of platform,like a sprayer maybe, but too far gone,

steelfronts · May 22, 2011

The 113 most likely wouldnt have a water pump. The 135 and 153 quite often are marked on the block C135 or C153. The 153 blocks are a litttle longerso there is a little shelf in front where the head meets. The bigger engines may have dipsticks and not be cut out for the steering shaft like on a B fqrmall. The 135 and 153 would have a hole blocked with a plate where the hydraulic pump would go on the tractor engine.I have put all of them in C"s and B"s. You are right they almost fit

113-123-135 engine ID

Anonymous-0

Well-known Member

steelfronts

Member

Similar threads