Purchased from IH 13194D screen and 355888R2 cork gasket . The new screen in about .070 in. thick versus .030 or so for the old falling apart screen.
So now when I install new parts the plastic screen protrudes above the recess in sediment bowl so I have to tighten the bail far tighter than I want using a pliers. Finger tight should be tight enough and the archives say "do not over tighten" or you will warp the body.
Any body ever run into this?
Was wondering if later tractors had a deeper recess in glass bowl? Thanks.
So now when I install new parts the plastic screen protrudes above the recess in sediment bowl so I have to tighten the bail far tighter than I want using a pliers. Finger tight should be tight enough and the archives say "do not over tighten" or you will warp the body.
Any body ever run into this?
Was wondering if later tractors had a deeper recess in glass bowl? Thanks.