1066 radio wires

youngin · May 13, 2011

Does anyone know what radio wires are what in my 1066 cab its an original cab.
I have a wire diagram, but I dont see the radio wires on it.
Thanks,
RFH

mkirsch · May 13, 2011

There are two or three different "original" cabs, and at least three other types that I've seen that "experts" would call "original." You're going to have to be more specific.

In general, there should only be two "radio wires." One being the 12V power, and the other being the antenna.

The radio would be grounded to the frame of the cab, and the speaker wires would run directly from the radio to the speakers. These wires you'd add when you installed the radio.

Remember this was in the day before "pre-wired" everything. So, there may be no wires at all.

1066 radio wires

youngin

Member

mkirsch

Well-known Member

Similar threads