IH 424 3pt housing plug

MTB · May 9, 2011

I am looking for help to ID the plug for this hole in the 3pt housing on a 424 IH. The plug is missing. The hole is threaded slightly larger that 1/2", but it is recessed with a 1 3/8" hole in the housing. The only guess I have is part number 172570, which is an expansion plug, but the book only shows 1 used. The hole has grease around it so it looks like it only had a threaded plug, but it courser than a standard pipe thread. Any help would be appreciated.

Bob · May 9, 2011

<img src = "http://i51.tinypic.com/1zz6q0j.jpg">

IMHO, you are missing Key numbers 20 (crosstube pivot bolt) and 21 (sealing washer).

#20, 2 used, Part #3044417R1 PIVOT, cross tube

#21, 2 used, Part #709840R1 SEAL WASHER, cross tube pivot

BTW, heres my 424, still in it's work clothes...

<img src = "http://i167.photobucket.com/albums/u125/27Grainfield/424IH/424FallCleanup.jpg?t=1304997472">

Bob · May 15, 2011

(quoted from post at 11:11:31 05/09/11) I am looking for help to ID the plug for this hole in the 3pt housing on a 424 IH. The plug is missing. The hole is threaded slightly larger that 1/2", but it is recessed with a 1 3/8" hole in the housing. The only guess I have is part number 172570, which is an expansion plug, but the book only shows 1 used. The hole has grease around it so it looks like it only had a threaded plug, but it courser than a standard pipe thread. Any help would be appreciated.

Did you get it figured out?

IH 424 3pt housing plug

MTB

Member

Bob

Well-known Member

Bob

Well-known Member

Similar threads