carb problem

Anonymous-0

Well-known Member
My 340 only wants to run with my hand over the carburetor.The float or needle must not be working right ether.It leaks around the bowl.It has had problems off and on.I had dirt get threw in the past to needle and seat.Then had to clean it.So I put a better filter on it.worked good for a year. I need to rebuild the carburetor.Will a worn throttle shaft on carburetor stop it from running. What other carbs will fit my tractor?
 
Yes bad throttle shaft seals/bushing etc will cause on to run rough and if bad enough keep it from running at all but it would have to be real bad. That is why all the kits I have ever seen have seals for the shafts in them. I have yet to find many carbs that can not be rebuilt unless there are broken parts that is. As for only running with your hand over the end of the carb means you are not getting enough fuel to the carb or to the engine. I would start by pulling the drain plug out of the bottom of the carb and let the fuel flow for at least 5 minutes. Catch that liquid gold so you can look at it for water and dirt etc. If you do not have a good flow work your way back till you find where the flow stops and fix it
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top