(800) 853-2651
SHOP NOW

Farmall C cultivators?

W

W-400 Chris

Member
Just recently purchased a Farmall C, not a beauty queen but runs great, I"m stoked as there aren"t too many farmalls in my part of the world, I think it was a good buy. I was curious what cultivators would fit on there ie: from an A B or H, any help would be great. Also anyone know where I can get a complete set of mounted cultivators for this machine only hard part is I"m in Northern Canada, BC Thank You in advance
 

The cultivators are raised and lowered by linkage from the touch control unit. The H & M tractors did not have the center mounted touch control but used the lift-all, or later live hydraulics to control the cultivators. Additionally the C did not use the front mounted lift arms from the A & B tractors but lift
units which bolt to either side at the front of the tractor. Rear
assembly attached to the axle rather than bolting inside the final drive castings as on the A & B. Altogether the two systems are
very different.

There was a great assortment of tool bars, clamps, standards and tools for all the cultivators and some of these will interchange.

The C was generally a two row tractor although variations of
up to four rows could be had, even on a Cub.

Maybe someone would have some early manuels with pictures
because there were really a great variety of cultivators.
 
I have 2 sets of cultivators for a C. There are a lot of them around here. I was at a sale yesterday and there was a set there they went for scrap price like 20 dollars. To bad your so far away.
 
I was curious what cultivators would fit on there ie: from an A B or H
Click to expand...

None of the above. You need cultivators for a C.

All you can do is look look look and look some more to find a set. There is no reliable source for such things.
 
(quoted from post at 05:21:54 04/21/11)
I was curious what cultivators would fit on there ie: from an A B or H
Click to expand...

None of the above. You need cultivators for a C.

All you can do is look look look and look some more to find a set. There is no reliable source for such things.
Click to expand...

You'll need the C-244 or the C-254 mounted cultivator. The C-244 (1948-49) has a touch control lift rod to the rear unit on both sides. The C-254 (1949-55) on the left only. I'll try and post pics I got from another YT member that shows both sets.

735.jpg


736.jpg
 
Has anyone ever seen the 452 4row veggie model here in the states or was it for export only. That pic was taken before the C even went into production.
 
I am posting a C-244 two row for the C later this evening. Now, I am posting it on Craigslist, Salina, KS. I know it does, as I took it off one that I will be posting for sale. I even have a magazine add for it, and I think, a manual. Will check in the a.m. and post back. Check with some of the NAFTA truckers that come through Salina, KS from all over Canada. They might pile it on somewhere! NOT SOLD for junk!
 
RE: now posting on Craigslist - get it later tonight as I have to get to grandson's track meet.
Sorry, really, I am.
 
Thank You Wayne, What are you asking for the cultivators and are they all complete ready to go on the tractor? What is the approximate weight of them, I could maybe check out Uship to try to get them up here, would you be able to put them on a pallet Thank You again
 
Thank You guys all for your help and information, this forum is one of the best always helpful with alot of good knowledge from good people, I am not too Farmall Savvy butI enjoy Red equipment and am working on filling my yard with lots of tractors.... much to my wifes dismay
 
You must log in or register to reply here.

Similar threads

B
farmall C hydraulics not functioning
Replies
3
Views
278
560Dennis
560Dennis
K
Farmall C kicks back when starting
Replies
11
Views
552
Janicholson
Janicholson
T
Farmall C charging system will not work
Replies
1
Views
301
used red MN
U
D
Farmall m paint
Replies
5
Views
395
gene bender
G
V
IH C Loader
Replies
3
Views
472
504
5
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top