(800) 853-2651
SHOP NOW

stuck ring in a B275 diesel

C

Clint Skarovsky

Member
I posted last week about putting rebuilt injectors into my neighbors B275 in which the fuel system had sat open for at least 2 years. Fortunately the tractor looks like it will survive. When we first fired it up we had a lot of smoke out of the exhaust and lots of blow-by out of the valve cover breather. This cleared up after a few minutes and then it ran great. After sitting for 3 days it was back again but went away after running for a few minutes. I assume that we've got a stuck ring somewhere. What's the best bet? Change the oil and add a quart of Risolone?

Thanks
 
ya do that and then you must work the heck out of it for about 1/2 day. make it pull all it can so the rings are forced out into the cyls. or else the engine may be just worn out.
 
Like the others say give it some work. If this dose not cure it take the cylinder head off and grind the valves and seats. When you have put the head back on torque it down to 80lb/ft and set all valves to 20thou. MJ
 
need to do more than that. requires pulling the pistons and reringing.be pretty foolish doing the head when you know the rings are stuck.
 
You must log in or register to reply here.

Similar threads

C
International B275 Glow Plug Resistors Element.
Replies
10
Views
710
Parity's Radicle
P
C
Stuck engine
2
Replies
20
Views
767
Pappy
P
C
TD40 restoration so far/burning oil
Replies
9
Views
384
Janicholson
Janicholson
grandpa Love
Nice Farmall A
Replies
16
Views
1K
KEB in GCMS
K
T
Diesel Fuel in Oil
Replies
10
Views
578
wore out
wore out
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top