farmall a magneto

blunted · Apr 10, 2011

doing my overhual, i took apart the geared piece that the rotor slips on, and now,with the gears in the distributer body, do thay have to be in a certan spot and how do i demess myself up? thanks.

teddy52food · Apr 10, 2011

Yes , they have to be in time. Clean the small gear to find 2 teeth with a beveled edge. Line up the C on the big gear & put together.

blunted · Apr 10, 2011

thank you;;;

gene bender · Apr 10, 2011

If you have the mag out you can turn it over till the rotor atops then the rotor should point to the tower where the wires go to the plug looking at the rotor #1 is around the 1o clock position

blunted · Apr 10, 2011

there is a movement to turn it on the block. it is a hand crank. where is the adjustment so it cranks and wont break your arm? thanks.

farmall a magneto

blunted

Member

teddy52food

Well-known Member

blunted

Member

gene bender

Well-known Member

blunted

Member

Similar threads