supe c sticking in two gears

DENNIS REID · Apr 7, 2011

I pulled the shifter out of tranny, and it looked very worn. I had a man weld onto the end of the shifter to make it thicker. Not much improvement. It also make a growling sound sometimes, which I suspect is the transmission trying to pop out of gear.

Any one have an idea the deminsions of the end of the shifter which moves the gears?

thanks so much.
Dennis Reid
770.537.9769

Janicholson · Apr 7, 2011

With the lever out, use a small clean stick to fit into the rails. (in neutral) whittle it down till it fits well front to back, and side to side in one rail notch. round the bottom corners and top recess so it can move the rails forward and back. Make your shifter the same, Try it and grind or file off just enough to make it work freely but snugly. Jim.

DENNIS REID · Apr 8, 2011

Thanks So Much.

That is a GREAT tip.

Dennis Reid

sflem849 · Apr 8, 2011

Also check the pin and shifter hole for wear. This is another major wear spot that should/could be tightened up.

supe c sticking in two gears

DENNIS REID

New User

Janicholson

Well-known Member

DENNIS REID

New User

sflem849

Well-known Member

Similar threads