H sleeves.

teddy52food · Apr 6, 2011

If anyone is rebuilding an H or super H that has a 3 7/16 bore, I could use a couple sleeves for another project. They can be worn as I will have to bore them to 3.5 anyway. I will gladly pay shipping. Thanks.

Farmall Bob · Apr 6, 2011

I don't understand something here. Don't sleeves and piston come in sets? Isn't it more trouble to fine or machine pistons to fit?
Bob

The Gambler pulling team · Apr 6, 2011

I have three pistons and sleeves that came out of a farmall H that someone rebuilt and must have cracked one of the sleeves when installing. I bought the tractor with a knock after taking it apart found #3 sleeve in oil pan. The pistons are flat tops and fairly new. They say conformatic on them.

gene bender · Apr 6, 2011

With the rite stuff it is possible they arent matched you just bore to spects.

teddy52food · Apr 6, 2011

Do you know the OD of those sleeves? Is a sleeve from a super H the same or are they a little bigger?

teddy52food · Apr 6, 2011

I don't need the pistons as this is another project not IHC. Thanks.

rustyfarmall · Apr 7, 2011

(quoted from post at 19:50:41 04/06/11) Do you know the OD of those sleeves? Is a sleeve from a super H the same or are they a little bigger?

A sleeve from a Super H will have a larger O.D. than a sleeve from an H, but I do not know the dimensions.

H sleeves.

teddy52food

Well-known Member

Farmall Bob

Member

The Gambler pulling team

Member

gene bender

Well-known Member

teddy52food

Well-known Member

teddy52food

Well-known Member

rustyfarmall

Well-known Member

Similar threads